PD92201 Converter Status Remote Pendant
The Converter Status Remote Pendant PD92201 is designed to plug into the standard accessory port on all models of the Inteli-Power 9200 Series Converters. The Converter Status Remote Pendant shows the charger/converter operating mode and allows for manual mode selection.
The PD92201 Converter Status Remote Pendant is available for purchase if you don’t have one. Click Here to Purchase.
How it Works
The PD9200 Series and the new PD9300 RV Converter/Chargers have our patented Charge Wizard built-in to provide you with the most advanced RV battery charging system on the market today. The Charge Wizard is a micro-processor controller that constantly monitors your RV battery voltage and then automatically determines which one of four modes of operation is best suited to recharge or maintain optimum battery condition. The four modes are BOOST, NORMAL, STORAGE and DESULFATION. The Converter Status Remote Pendant will show you which mode the converter is operating in.
Charge Wizard Products
(for the 9100 series only) See below for compatable models
Plugs into the accessory port to show charger/converter status and allows for manual mode selection. This allows easy field upgrade to your PD9100 series deck mount converter/charger by simply plugging the Wizard into the built-in TCMS® connector located just above the fuses on the output panel. U.S. Patents: 5,982,643 and 6,184,649 Buy Now
(for the 9200 & 9300 series only)
The Charge Wizard is also available as a pendant, for charging lead-acid batteries. The Pendant is included with all retail models. (Model number ending in V) U.S. Patent 6,184,649 Buy Now
The Manual Switch
The Manual Switch allows the operator to check to see if the Charge Wizard is operating properly as follows:
Press and hold the Manual Switch and shortly the Indicator Light will remain “ON” all of the time, indicating the unit went into the BOOST MODE. Continue to hold the switch and shortly the Indicator Light will start blinking rapidly (every 2-3 seconds). This indicates the unit went into the NORMAL MODE. Continue to hold the switch and the unit will go into the STORAGE MODE, and the Indicator Light will start blinking slowly (every 6-8 seconds). Once the switch button is released, the Charge Wizard will again read the RV battery voltage, and after some period of time, automatically select the proper mode of operation.
The Desulfation Mode
The DESULFATION MODE is only active when the Charge Wizard is in the STORAGE MODE. During this mode a timer in the micro-processor automatically switches the Charge Wizard to the BOOST MODE for 15-minutes every 21-hours. This higher voltage causes some slight gassing, and mixes up the battery electrolyte to prevent battery stratification, and the resulting sulfation of the plates, which is the leading cause of loss of battery power.
Note: When no 120 VAC power is applied to the RV through the Shore Power Cord, or Generator, the Indicator Light will remain “ON” at all times. This indicates that the Charge Wizard is monitoring the battery voltage.
Please refer to the Remote Pendant Package Insert for additional information
Indicator Lights
- Light “ON” all of the time – Indicates the unit is in the BOOST MODE and the converter output voltage is 14.4-volts and is in the process of recharging the battery up to 90% of full charge as fast as possible. This mode is usually automatically selected after dry camping.
- Light Blinks Rapidly (from once to many times a second) – Indicates the unit is in the NORMAL MODE and the converter output voltage is 13.6-volts. In this mode, the converter is safely completing the charge of the RV battery..
- Light Blinks Slowly (every 6-8 seconds) – Indicates the unit is in the STORAGE MODE and the converter output voltage has been lowered to 13.2-volts. In this mode the RV battery is fully charged and the converter is maintaining the charge, without causing gassing or water loss.
Which Models does this work with ?
Model | Use With | Function | More information |
---|---|---|---|
PD92201 Converter Status Remote Pendant | PD9200 series PD9300 series | Manual control and monitoring while charging Lead Acid / AGM batteries. Also used to manually charge Lithium by pressing the Button Monthly or when charge is needed. | Pendant |
PD92201 Converter Status Remote Pendant | PD9160ALV 2 Stage PD9145ALV 2 Stage PD9130LV 2 Stage | Use to monitor the Lithium charge mode. on 2 Stage only. | PD91XXALV 2 Stage |
SPD9220146 PendantOnly available Here: | PD4600 Series. This will also work on the PD4000, PD4100 and PD4500 series that have the 4 pin single row header. Not necessary if the unit has a button and light. | Manual control and monitoring while charging Lead Acid / AGM batteries. Also used to manually charge Lithium by pressing the Button Monthly or when charge is needed. | |
PD9105 Charge Wizard Lead-acid and AGM type Batteries | PD9130, PD9130V, PD9140, PD9145A, PD9145AV, PD9160A, PD9160AV, PD9170, PD9180A, PD9180AV | Adds the charge Wizard features to the PD9100 Lead Acid /chargers. Manual control and monitoring while charging Lead Acid / AGM batteries. Also used to manually charge Lithium by pressing the Button Monthly or when charge is needed. |
Wizard Guide by Converter Model
Model | Light and Button Location | Accesories | Instructions |
---|---|---|---|
PD9245 PD9260 PD9270 PD9280 | Wizard is built into the 9200 and will run automatically. For Manual operation the Pendant is necessary. Light and Button are located on the Pendant Accessory. PD92201 Pendant . | PD92201 Pendant | |
PD9130 PD9140 PD9145 PD9160 PD9170 PD9180 | The Wizard is an optional accessory for these units. It is not included in the PD9100 series. Light and Button are located on the Wizard Accessory. PD9105V ***This does not fit the Lithium series chargers.*** | The PD9105V Wizard is no longer available as of June 2023 | |
PD4635 PD4645 PD4655 | Wizard is built into the PD4600 and will run automatically. For Manual operation the Light and Button are located on the Fuse Board . If not using our fuseboard there is a Pendant Accessory. available. Here:SPD9220146 | ||
PD9130LV PD9145ALV PD9160ALV PD9180ALV 2- Stage LiFePO4 | For Manual operation the Pendant is necessary. Light and Button are located on the Pendant Accessory. PD92201 Pendant . ***Will not work with Single stage models without the 2 stage sticker*** | PD92201 Pendant |