PD2150 (50 Amp) Converter/Charger
The PD2150 is a 50-amp Electronic Marine Converter/Charger capable of charging up to three separate banks of batteries at the same time. It incorporates a microprocessor that constantly monitors battery voltage, then automatically selects one of four operating modes to ensure safe, rapid recharging cycles. The Storage Mode and the Equalize Mode of operation ensures minimum battery gassing and water loss while preventing battery stratification and sulfation. All Inteli-Power chargers are designed to meet the stringent requirements of the Marine environment and are UL listed for safety. A digital meter displays current, voltage, operation mode, blown fuse indication, and battery type.
- Four-Stage Charging System
patented Microprocessor constantly monitors battery voltage and automatically selects one of the four charging modes; BOOST, NORMAL, STORAGE or EQUALIZE.
- 3 Diode Isolated Outputs
allows the converter/charger to charge three separate banks of batteries. Each output is capable of handling the full rated current of the charger.
- Patented Reverse Battery Protection
prevents converter/charger from being damaged if the batteries are accidentally connected to the charger in reverse.
- Over Voltage Protection
prevents high voltage spikes from damaging the converter/charger.
- Electronic Current Limiting
limits the output current to the maximum rating of the charger to prevent overheating and damage caused by shorts or excessive loads.
- Variable Speed Intelligent Cooling Fan
only runs as fast as required to maintain a more constant operating temperature inside the converter/charger. This feature reduces thermal stress caused by fans that cycle on and off.
- Programmable in the Field
to provide optimum charging profiles for lead-acid, gel-cell, or AGM batteries.
- Regulated Output Voltage
prevents AC Line voltage variations from being transmitted to the batteries and 12 volt circuits.
- Automatic Over-Temperature Shutdown
prevents converter/charger damage in the event the fan is unable to cool the charger due to inadequate compartment ventilation.
- Series or Parallel Connection
Inteli-Power Converter/Chargers can be connected in series to provide a combination 12/24 Volt system, or in parallel to provide more current.
105-130 VAC, 50-60 Hz, 900 Watts
10.9″L x 7.8″W x 4.2″H