PD2120 (20 Amp) Converter/Charger
- Four-Stage Charging System
patented Microprocessor constantly monitors battery voltage and automatically selects one of the four charging modes; BOOST, NORMAL, STORAGE or EQUALIZE.
- 3 Diode Isolated Outputs
allows the converter/charger to charge three separate banks of batteries. Each output is capable of handling the full rated current of the charger.
- Patented Reverse Battery Protection
prevents converter/charger from being damaged if the batteries are accidentally connected to the charger in reverse.
- Over Voltage Protection
prevents high voltage spikes from damaging the converter/charger.
- Electronic Current Limiting
limits the output current to the maximum rating of the charger to prevent overheating and damage caused by shorts or excessive loads.
- Variable Speed Intelligent Cooling Fan
only runs as fast as required to maintain a more constant operating temperature inside the converter/charger. This feature reduces thermal stress caused by fans that cycle on and off.
- Programmable in the Field
to provide optimum charging profiles for lead-acid, gel-cell, or AGM batteries.
- Regulated Output Voltage
prevents AC Line voltage variations from being transmitted to the batteries and 12 volt circuits.
- Automatic Over-Temperature Shutdown
prevents converter/charger damage in the event the fan is unable to cool the charger due to inadequate compartment ventilation.
- Series or Parallel Connection
Inteli-Power Converter/Chargers can be connected in series to provide a combination 12/24 Volt system, or in parallel to provide more current.
105-130 VAC, 50-60 Hz, 350 Watts
10.9″L x 7.8″W x 4.2″H