|
|
|
40 Amp Charger
(Gel-Cell Batteries) |
|
 |
The
PD2040 is a 40-amp electronic
battery charger capable of charging up to three separate banks of
batteries at the same time. It incorporates a microprocessor that
constantly monitors battery voltage, then automatically selects
one of three different charging voltages and one of four operating
modes to ensure safe, rapid recharging cycles. The Storage Mode
and the Equalize Mode of operation ensures minimum battery
gassing and water loss while preventing battery stratification and
sulfation. All Inteli-Power chargers are designed to meet
the stringent requirements of the Marine environment and are UL
listed for safety. |
|
Input: |
105-130 VAC, 50/60 Hz 650 Watts |
|
Output: |
13.6
VDC, 40 AMPS |
|
Dimensions: |
L =
10.2" W = 7.8" H = 4.2" |
|
Weight: |
5
lbs. |
|
Features
 |
Reverse battery
protection prevents charger damage if battery leads are
accidentally reversed. |
|
|
Models now
available with lower voltages to safely recharge gel-cell
batteries. |
|
|
Charges up to
three battery banks. |
|
|
Built-in high
voltage protection. |
|
|
Built-in amp
meter is standard. |
|
|
Quiet sensor fan. |
|
|
Electronic short
circuit protection. |
|
|
Over temperature
safety shutdown. |
|
Return to Previous Page
|
