|
PD9100 Series
RV
Power Converters
The Progressive Dynamics 9100 Series INTELI-POWER
converters are UL listed for the US and Canada.
They provide safe, reliable, filtered DC power to all
Recreational Vehicle 12-Volt lighting and appliance
circuits. The Inteli-Power converter also safely
recharges and maintains the RV battery and has a
two-year limited warranty.
Patent #'s:
5,600,550- 5,687,066- 7,782,002
The
built in Total Charge Management System (TCMS) connector
allows the RV manufacturer, dealer, or customer to
easily add the optional
Charge Wizard. The Charge Wizard
is a microprocessor-controller that constantly monitors
the RV battery voltage to determine if the battery
requires a quick recharge, is fully charged and being
used, or is fully charged and is in storage. The Charge
Wizard then selects one of three charging voltages:
14.4, 13.6, or 13.2; and one of four operating modes
(Boost, Normal, Storage or Desulfation) to properly
re-charge or maintain the battery.
Click here for more information on
the Charge Wizard.
INTELI-POWER
9100 SERIES OPERATION
Progressive
Dynamics 9100 Series Electronic Power Converters have several features
that differ from other electronic power converters presently marketed
to the RV industry. Reliability data over the past eight years on over
400,000 units in the field have proven that these design features
increase our reliability and provide the following additional customer
benefits.
1.
ELECTRONIC CURRENT LIMITING – This safety feature will
rapidly reduce the converter output in case of an
electrical short or overload condition. This rapid shutdown like the
circuit breaker in your house prevents possible RV wiring and
converter damage.
2.
VARIABLE SPEED INTELLIGENT COOLING FAN – Solid state
temperature sensing and control system automatically monitors
converter temperature and activates the fan at speed required. Very
slow, quiet speeds are used when demand is low, such as during
sleeping hours. Some
competitive converters use Electro-mechanical devices to provide
temperature sensing and fan control. Electro-mechanical sensors are
more subject to failure and may stick in the closed mode causing the
fan to operate all the time, resulting in an irritating noise. They
can also fail to close during high temperature conditions and prevent
the fan from operating. This failure may cause over heating and
possible converter failure.
3.
AUTOMATIC THERMAL PROTECTION – This safety feature
will reduce converter output in the unlikely event of a fan failure
and prevent damage to the converter. This safety feature will also
activate if the area where the converter is mounted is too small, has
inadequate ventilation, or is accidentally covered by the customer.
Please refer to the installation instructions for information
regarding spacing and ventilation requirements.
4. LOW
VOLTAGE OPERATION – The Progressive Dynamics 9100 Series
Converters will operate at low AC line voltages without damage. This
feature is especially important in RV campgrounds where AC line
voltage can be as low as 90 volts. Low AC line voltages may damage
competitive converters.
5. HIGH
VOLTAGE PROTECTION – All converters incorporate our patented
High Voltage Shutdown circuitry. This feature automatically shuts the
converter down to protect sensitive electronics in the event of high
voltage transients on the AC power line, or if the RV generator
regulator should momentarily fail.
6.
REVERSE BATTERY PROTECTION – Our patented Reverse Battery
circuitry prevents converter damage and unnecessary warranty calls in
the event the customer or dealer accidentally connects the battery in
reverse. Simple replacement of the fuse(s) located on the front of the
converter restores the unit to normal operation. Some competitive
converters can be damaged and require replacement if the battery leads
are accidentally reversed.
7. TOTAL
CHARGE MANAGEMENT SYSTEM (TCMS) – All PD9100 Series Power
Converters incorporate a TCMS connector port located on the front of
the converter to allow for the installation of the optional Charge
Wizard.
Inteli-Power
Specifications Table
| |
PD9130
|
PD9140A |
PD9145A |
PD9160A |
PD9170
|
PD9180 |
|
Maximum DC Output Current |
30-AMPS |
40-AMPS |
45-AMPS |
60-AMPS |
70-AMPS |
80-AMPS |
|
Maximum Continuous Input Power |
500
WATTS |
600 WATTS |
725 WATTS |
1,000 WATTS |
1,250 WATTS |
1,300 WATTS |
|
No Load
DC Output Voltage |
13.6 VDC |
13.6 VDC |
13.6 VDC |
13.6 VDC |
13.6 VDC |
13.6 VDC |
|
No Load
Voltage Tolerance |
+/-
.3 VDC |
+/-
.3 VDC |
+/-
.3 VDC |
+/-
.3 VDC |
+/-
.3 VDC |
+/-
.3 VDC |
|
Full Load Output Voltage |
>
12.6 VDC |
>
12.6 VDC |
>
12.6 VDC |
>
12.6 VDC |
>
12.6 VDC |
>
12.6 VDC |
|
Ripple
and Noise Voltage |
<100
MV RMS |
<100
MV RMS |
<100
MV RMS |
<100
MV RMS |
<100
MV RMS |
<100
MV RMS |
|
Input
Voltage Tolerance |
105 -
130 VAC |
105 -
130 VAC |
105 -
130 VAC |
105 -
130 VAC |
105 -
130 VAC |
105 -
130 VAC |
|
Input Voltage Frequency |
50-60 HZ |
50-60 HZ |
50-60 HZ |
50-60 HZ |
50-60 HZ |
50-60 HZ |
|
Peak Inrush Current |
32-AMPS |
32-AMPS |
32-AMPS |
47-AMPS |
47-AMPS |
80-AMPS |
|
Efficiency (Typical) |
>
80% |
>
80% |
>
80% |
>
80% |
>
80% |
>
80% |
|
Reverse Battery Protection |
YES |
YES |
YES |
YES |
YES |
YES |
|
Electronic Current Limiting |
YES |
YES |
YES |
YES |
YES |
YES |
|
Electronic Fan Control * |
Auto-speed |
Auto-speed |
Auto-speed |
Auto-speed |
Auto-speed |
Auto-speed |
|
Back Up Thermal Protection |
YES |
YES |
YES |
YES |
YES |
YES |
|
Storage Temperature |
20-80C |
20-80C |
20-80C |
20-80C |
20-80C |
20-80C |
|
Operating Temperature |
0-50C |
0-50C |
0-50C |
0-50C |
0-50C |
0-50C |
|
Hipot Voltage Test |
<--------------
1240 V @ INPUT TERMINALS ------------> |
|
TCMS Interface Connector** |
Standard |
Standard |
Standard |
Standard |
Standard |
Standard |
|
Weight |
4 LBS. |
4.5 LBS. |
4.5 LBS. |
5.8 LBS. |
5.8 LBS. |
7.5 LBS. |
|
Dimensions |
8.25"L X 7.25"W X 4.5"H |
8.25"L X 7.25"W X 4.5"H |
8.25"L X 7.25"W X 4.5"H |
8"L X
9.00"W X 3.6"H |
8"L X
9.00"W X 3.6"H |
11.5"L X
9.00"W X 3.6"H |
|
UL & c UL Listed |
YES |
YES |
YES |
YES |
YES |
YES |
*
Fan controlled by temperature sensor normally operates
only during high load conditions.
**
TCMS (TOTAL CHARGE MANAGEMENT SYSTEM) ALLOWS CUSTOMER TO
EASILY INSTALL THE OPTIONAL CHARGE WIZARD MODULE. CAN
ALSO BE USED IN CONJUNCTION WITH THE INTELITEC ENERGY
MANAGEMENT SYSTEM TO CONTROL CHARGER ON AND OFF TO
REDUCE AC POWER CONSUMPTION.
Click Here: For More Information Regarding Power
Converters
View The Inteli-Power 9100 Owners Manual (PDF)
Return to Previous Page
|